Alphacool Unveils Enterprise Series D-Plug Connectors

Controller Master


Alphacool today presents the D-Plug, a new connector from the ENTERPRISE SOLUTIONS series. The ES D-Plug has 2 G1/4″ external threads and offers the possibility to connect components such as graphics cards, CPU coolers or radiators to each other within the cooling loop. The special feature of the D-Plug is that they are push-fit rather than screwed together. Each D-Plug has a variable length which can be achieved by pulling the connector apart, an extension of up to 15 mm is possible. The additional length available allows a high degree of flexibility in compensating for inaccuracies in the system design. The lack of a screw connection prevents the possible twisting of hoses during installation.

Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. The ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm – optionally in brilliant chrome or matte black.

Variants:

  • Alphacool ES D-Plug 20 mm G1/4 AG to G1/4 AG – Chrome (MSRP 6,99 €)
  • Alphacool ES D-Plug 20 mm G1/4 AG to G1/4 AG – Deep Black (MSRP 6,99 €)
  • Alphacool ES D-Plug 25.5 mm G1/4 AG to G1/4 AG – Chrome (MSRP 7,29 €)
  • Alphacool ES D-Plug 25.5 mm G1/4 AG to G1/4 AG – Deep Black (MSRP 7,29 €)
  • Alphacool ES D-Plug 31.5 mm G1/4 AG to G1/4 AG – Chrome (MSRP 7,69 €)
  • Alphacool ES D-Plug 31.5 mm G1/4 AG to G1/4 AG – Deep Black (MSRP 7,69 €)
  • Material: Brass
  • Diameter: 20 mm
  • Thread: G1/4″ OT
  • Thread length (incl. O-ring): 5 mm
  • Pressure tested 1.5 Bar

For more information, visit this page.