ASRock gibt weitere Details zu seiner Reihe von X670E-Motherboards bekannt
[ad_1]
The X670E Taichi Carrara is a special edition of the regular X670E Taichi which was created to celebrate ASRock’s 20th anniversary. It carries over all the features from the regular Taichi model, but adds some rather unusual heatsink and rear I/O covers that have a marble effect, something we’ve never seen on a motherboard before, hence the name of the board.
Next up we have the X670E Steel Legend, although ASRock didn’t provide a detailed picture of the board, but the specs does at least give us an idea of what to expect. The board should have a single PCIe 5.0 x16-Steckplatz, sowie ein einzelnes PCIe 4.0 x4-Steckplatz, as well as four M.2 slots, again one of the PCIe 5.0 variety and four PCIe 4.0. The Steel Legend also has an HDMI and DP port, vier SATA-Anschlüsse, a rear port and a front header for USB-C Gen 3.2 2×2 (20 Gbit/s), a Realtek Dragon 2.5 Gbit/s-Ethernet-Controller, as well as a 1 Gbps Intel Ethernet controller and an unspecified WiFi 6E and Bluetooth module. The audio is based on a Realtek ALC1220 audio codec and finally there’s an 18 phase power design.
The final board in the lineup is the X670E Pro RS, which is likely to be one of the cheapest X670E based boards. Here ASRock has yet again gone for a single PCIe 5.0 x16-Steckplatz, but the two other PCIe 4.0 slots are only of the x1 variety. The board still has a PCIe 5.0 M.2-Steckplatz, plus three PCIe 4.0 and one PCIe 3.0 x2 M.2 slot, which is shared with two of the six SATA ports. There’s also a single rear mounted USB-C Gen 3.2 2×2 (20 Gbit/s-Port), a Realtek Dragon 2.5 Gbps Ethernet port and a front mounted USB-C header. For whatever reason, ASRock fitted an antiquated Realtek ALC897 audio codec, which is not something we expected to see on this level of board. Although there’s no onboard WiFi out of the box, ASRock did include an M.2 E-keyed slot for one. ASRock went with a 16 phase power design here, which is kind of expected on a lower-end board.
[ad_2]