Blocchi d'acqua EK completamente compatibili con le CPU Raptor Lake di 13a generazione
These water blocks use a socket-specific cooling engine to ensure the best performance and optimal flow with low restrictions on every platform. Since the Z790 platform is based on the LGA1700 socket, the EK-Quantum Velocity² 1700 water blocks are fully compatible with the CPU socket and IHS geometry of Intel 13th Gen Core CPUs.
EK-Quantum Velocity² D-RGB – 1700
Incorporato nel Velocity² è un motore di raffreddamento del blocco dell'acqua della CPU EK di nuova generazione specifico per il socket. Una combinazione di pressione di montaggio e geometria della piastra fredda, su misura per l'IHS e il layout del die di Intel LGA 1700 processori socket, is used to achieve low hydraulic flow restriction and ensure high performance. The lathe-turned coldplate is made with precision to cover the IHS effectively and put optimal pressure on the die area.
EK-Quantum Velocity² water blocks use a patent-pending EK-Exact Mount mounting system that was developed in the search for an easy-to-use but aesthetically pleasing mounting mechanism. It is comprised of only two pieces – the backplate and the water block itself – and it’s screwed in from the back, allowing for a seamless and clean front look without any screws disrupting the harmony of shape. The system uses pre-tensioned springs concealed in the water block top, so the installation is finished and the exact mounting pressure achieved with just a few turns of the thumb nuts.
L'LGA 1700 version is made for Raptor Lake, and Alder Lake CPUs and comes in 7 varianti:
- Nichel + plexiglas
- Nichel + Acetale
- Nichel pieno
- Nichel + Titanio satinato
- Rame + Acetale
- Nichel + Gold
- Lignum Edition – Walnut
Queste variazioni sono basate sull'estetica e non hanno quasi alcun impatto sulle prestazioni. The coldplate is manufactured out of the highest-grade 99.99%-pure electrolytic copper, machined with precision for the best possible contact and heat transfer. The copper is then nickel-plated, except for the Copper + Acetal version, which uses a bare copper coldplate.
The EK-Quantum Velocity² is an EK-Matrix7-certified product. EK-Matrix7 è un comodo prodotto raster che aggiunge una nuova dimensione al raffreddamento a liquido del PC, dove incrementi di 7 mm gestiscono l'altezza dei prodotti e la distanza tra le porte. This improves product alignment and reduces the time spent planning the loop and bending the tubes. Through the meticulous planning and design of our products, costruire un PC raffreddato a liquido diventa facile e divertente, just like playing with toy bricks.
New EK-Quantum Velocity² series CPU water blocks are socket-specific, compatible only with Intel LGA1700 socket CPUs.
EK-Quantum Velocity² D-RGB – 1700 CPU water blocks are equipped with 14 D-RGB LEDs. The models with clear acrylic tops are entirely lit, while the solid-top options have sophisticated light beams cutting across them. They are compatible with all popular addressable RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is aligned with the +5V marking on the addressable RGB header.
Disponibilità e prezzi
The EK-Quantum Velocity² series water blocks are made in Slovenia, Europe, and are available for order through the EK Webshop and Partner Reseller Network. La tabella seguente mostra il prezzo al dettaglio suggerito dal produttore (MSRP) con IVA inclusa.
