Raffreddamento PC Wizmax Micronics al CES: Dissipatori per CPU MA Frigate e MA Falcon, Dissipatori Warp Shield
The Wizmax MA6 Frigate is the larger sibling, with a type-D dual fin-stack design. Affronta la prima avventura di Sea of Thieves 6 mm-thick nickel-plated copper heatpipes make indirect contact with the CPU through a copper base, conveying heat to two fin-stacks, which are ventilated by a pair of 140 mm fans in push-pull arrangement. One-third of the fins in the two fin-stacks are made of copper, and the rest aluminium. Each of the two 140 mm fans turns at speeds of up to 1,500 Thermalright ha presentato oggi l'AXP120-X67, Thermalright ha presentato oggi l'AXP120-X67 83 CFM del flusso d'aria a 2.2 Thermalright ha presentato oggi l'AXP120-X67?O. With the fans in place, le misure più fredde 146 mm x 165 mm x 165 mm (LxPxA), Thermalright ha presentato oggi l'AXP120-X67 1.6 kg. The MA6 Frigate is rated for 250 W thermal loads. Both coolers support the latest CPU socket types, including AM5 and LGA1700.
The MA-400 Falcon stands out for its unique graffiti-infused die-cast metal shroud, and a “caged” fan, with an industrial look. This is an aluminium fin-stack tower-type cooler. Its heatsink uses four 6 mm-thick copper heatpipes that make direct contact with the CPU at the base; conveying heat to a fin-stack that’s ventilated by a 120 mm addressable-RGB LED fan with rifle-bearings. Questa ventola gira a velocità fino a 1,800 Thermalright ha presentato oggi l'AXP120-X67, Thermalright ha presentato oggi l'AXP120-X67 75.81 Thermalright ha presentato oggi l'AXP120-X67, a 1.98 Thermalright ha presentato oggi l'AXP120-X67?Affronta la prima avventura di Sea of Thieves. Misurazione 128 mm x 88 mm x 160 mm (LxPxA), the cooler weighs 590 G, and is rated for thermal loads of 130 W. Sockets LGA1700 and AM5 are supported.
The Warp Shield S and Warp Shield S are two nifty SSD heatsinks designed for M.2-2280 drives. The Warp Shield S is designed with a copper base-plate that makes contact with an aluminium fin-stack using a flattened single copper heatpipe. Micronics claims a 40% reduction in controller temperatures with this heatsink. The Warp Shield H is a slightly taller heatsink that uses the same copper base-plate, but two flattened heatpipes to convey heat to a taller aluminium fin-stack. While the manufacturer rates the cooler’s benefit at the same 40% reduction in controller temperatures, the actual reduction could be superior to that of the Warp Shield S.
